Multi-functional pipe for agriculture
Description of product
In life, non-toxic and non-pollution of agricultural products is
the focus of people's attention. The new PE pipe for agriculture
developed by Ginde is non-rust, non-corrosion, non-leakage,
non-stain, renewable and recyclable. There is non-pollution and
non-toxic used in agricultural irrigation and potable water
transportation. It is health environmental protection pipe with
high quality. According to its characteristics, the new generation
of multi-function green agricultural PE pipe can be applied to
plantation, the garden and stockbreeding. Because of its excellent
electric insulation, it can also be used as insulating conduit
Features of PE agricultural pipeline system
1.Smooth inner surface, small resistance and non-rust. The
requirement to water quality is not rigorous and non-dirt.
2.Good resistance to low temperature and wide working temperature
range, it can be used normally between -20~40.
3.Superior abrasion resistance ability. The lifespan of the pipe
will not be affected through being dragged on the ground when used
as movable branch pipe.
4.Stable performance of the pipe, good sanitation, no influence to
water quality, it will not affect the non-toxic and non-pollution
of cropper because of all the above. At the same time, it can be
used in the transmission of low-pressure potable water.
5.The PE agricultural pipe has excellent anti-aging performance,
long term sunlight and underground burying can also guarantee its
6.Pipe with anti-microbial aids can inhibit coliform in 1000 per
liter to ensure the safety of agricultural products for consumption
and sanitation performance of potable water.
7.Better tenacity of PE pipe, it can be bended and coiled and
8.PE agricultural pipe has predominant performance of anti-rapid
spread and anti-slow growth of crack, and good defense dangling
9.PE agricultural pipe has good corrosion resistance and stable
performance, when such as fertilizer in the water be delivered it
will not be corrupted but does not destroy the nutrients in
fertilizer, and can also guarantee the production demand of
10.Prominent chemical resistance especially for sea water, suitable
for coastal marsh, great adaptability to soft site, suitable for
agriculture, irrigation water, farmland finishing, and so on..
11.It has excellent insulation performance, and can be used as
1.Water saving agricultural irragation pipe
2.Well water transporting pipe
3.Potable water transporting pipe
4.Electric power protecting sleeve pipe
5.Pipe used in other water resources and hydropower
Our company adopts plastic molding extrusion machine designed and
made by the most advanced production technique in the world at
present, and has the advanced performance of extrusion molding at
high speed, incision at a set size automatically and controlling
the whole production process by micro-software. Of which in the
micro-software system (C4) controlling producing process, starting
time and temperature control standard can be input and set in
advance according to the producing procedure. At the same time the
moving speed of the equipment motor and screw, melt pressure,
outputs extruded, tensional load and modification of procedure
data, and so on should be monitored and recorded automatically,
prepared to be read, alarmed when in danger, halt automatically and
show the amending propose and correction specification on the
screen (six languages can be supplied to be used for reading).
Therefore, it guarantees fundamentally the equipment intact and
normal production. The advanced design of mechanical construction
is a complete combination formed by technology design of single
screw with flat taper to unique scientific compression ratio and
mechanical structure. It has superior performance of secondary
exhaust, repeat compression, appropriate melt and high speed
extruding production. Meanwhile it is equipped with by mixing
apparatus with automatic measurement and transmission, obdurate
without dust and homogeneous mix and distribution, which guarantees
the continuity of the production process automation.
We consider quality of products as life and has strict quality
system. In order to guarantee the quality of products, Ginde
company takes monitoring and inspection on the whole production
line and three-tier inspection system, that is raw materials
incoming inspection, testing in the producing procedure, testing in
the products laboratory and testing final product. Ginde pipe group
has a national Ginde Pipeline Research and Testing Center which
promoted a national testing center in 2003. This center has the
most advanced testing equipment in the world and professional
inspector, the testing equipments are mainly introduced from many
famous manufactures at home and abroad, such as all-purpose tensile
testing apparatus, Vicat softening testing apparatus, pressure
resistance and burst experiment apparatus, hammer impact testing
apparatus, flame retardation and electric conduction performance
testing apparatus, and so on, this is integrate testing center
gathering the completes detecting and experiment apparatus in the
same industry. Thereby it can ensure that the data is accurate and
reliable, and provide a reliable guarantee for products of high
1. The inner and outer surface of pipe should be smooth. Bubble,
trachoma, crack and apperant mark, impurities, concavity, uneven
color and decomposition of color line are not permitted.
2. The port of pipe should be smooth and vertical to the axis.
The standard PE pipe is expressed by de (nominal diameter,
mm)x(nominal wall thickness, mm)/p(nominal pressure, Mpa).
For example: if the nominal diameter is 200mm, wall thickness is
11.8 and the nominal pressure is 0.4Mpa, then the standard is
1. General principle
1.0.1. To unify the technical requirements of irrigation system for
low pressure pipeline water transportation in the well water
irrigation district and bringing into full play of the project
efficiency, then set up this specification.
1.0.2. This specification can be applied to the plan, design,
construction installation, inspection and operation and maintenance
of the low pressure pipeline transportation irrigation project in
well water irrigation district.
1.0.3. In low pressure pipeline irrigation construction, the well,
pump, pipeline system and field project must be taken into
consolidated consideration for advanced technology, economic
rationality and significant efficiency.
1.0.4. The low pressure pipeline irrigation wells: new wells must
be checked and accepted by the finished wells; the existing well
must be good well prescribed in SD188 < Agricultural well
technical specifications >.
1.0.5. Addition to the implementation of this specification, the
construction of low pressure pipeline irrigation project shall also
comply with the provision of the existing concerned rules and